FAQ

Silos, with a height of over 5m and weight of 5~40 tons, are usually installed in the open air. Big errors in data reading (+-10%) are common with traditional silo weighing systems, due to the following:

1. Load cells, under constant pressure, tend to lose sensitivity as time goes

2. Changes in seasons, temperature and climate often cause changes in silo shape and position

3. The vibrations of other surrounding equipment often at resonance make it hard for load cells to get valid reading

WitGood is the 1st Intelligent Silo Weighing System,Widely Adopted by Livestock Industry.

WitGood Intelligent Silo Weighing Solution applies next generation technologies including Intelligent Algorithms, Cloud Computing and Smart IoT Platform, delivers Precise & real-time feed data without tedious manual calibrations, filters data deviation by applying intelligent algorithms, and solves all problems derived from the traditional silo weighing system.

WitGood satisfies the needs of modern livestock breeding farms and have been successfully adopted by +100 agriculture group enterprises.

WitGood can offer the following cost saving benefits:

1. Eliminate feed wastes

2. Minimize operation disruptions

3. No cost for calibrations of load cells

4. Timely management reports available via WitGood App or PC. No lengthy paperwork for onsite staff. 

WitGood system delivers best performance in the following circumstances:

Temperature range: -40 ℃ to 85 ℃ 

Relative humidity: < 85% RH, avoid strong corrosive air/gases.

Maximum weight one load cell can carry: 5 MT

Normally, one Intelligent Controller can support one to eight independent load cells.

WitGood can also provide the following management reports:

1. Feed addition and consumption analysis

2. Alert of abnormal situations such as feed release during feed addition, unusual spikes on feed consumption, and insufficient feed stock in silo etc.

3. Feed consumption comparison by livestock batches, feed to meat ratio or feed to egg ratio analysis by farms within the group

4. Automatic generation of feed purchase order and push to feed mill’s system, linking data along the industry supply chain.

The installation of WitGood system depends on the specific setup and requirements of the farm. However, WitGood system is designed to be easily installed and integrated into existing feeding infrastructure. As for maintenance, regular checks and data deviations are prompted or warned by system algorithms, and calibration can be completed through the mobile app.

Yes. WitGood system is designed to be compatible with other farm management systems. Data from WitGood system, can be integrated with larger farm management software or hardware solutions for comprehensive monitoring and analysis.

Yes. WitGood system can be customized to accommodate different livestock types and feed requirements. Its Intelligent Controller can be programmed with specific feeding protocols, such as different feed formulations for different stages of growth or production. The system can also be adjusted to accommodate variations in feeding behavior or individual animal needs.

The cost of WitGood system can vary depending on factors such as the system's complexity, size, and additional features. Please contact us for specific pricing information based on individual farm needs.